As far as I understand people are able to get backups of their watch in order to preserve OTA’s before rooting, and I was able to flash some zips and kernels successfully, and I fixed the UI to look better and actually usable on the watch
Also, I was able to flash this puppy, and I got android wear to boot with it flashed, however sometimes it goes haywire and only boots into recovery. Same thing applies, this shall be a Tethered recovery unless you are brave enough to flash it and test
As always, problems can arise on your watch, so be careful!
Here is the link to the fixed twrp
Get into fastboot, either by enabling adb by enabling developer options going into settings, about, and taping the Build number 8 times, and going back, down to developer options and enable ADB Debugging.
Then you can type into your CMD or terminal adb reboot-bootloader or by powering down by holding the button or power down in settings, when the screen goes black, repress and hold the button and swipe the screen from the upper left down to the lower right and that should bring up the ASUS logo with CSC Fastboot Mode! on the screen
Now to use it is solely up to you, you can either continue to boot the recovery by typing fastboot boot recovery.img or you can flash it with fastboot flash recovery recovery.img it is weird but i found that fastboot flashing makes it more prone to issues, like only powering into recovery, over fastboot booting it and then flashing twrp with twrp However more than once i had it only boot me into the recovery partition either way, so flash at your own risk!
I also have a kernel underway if people would like to try it out and test it in the next couple days