ODIN TWRP 3.0.0.0 : SM-J110H – Download custom recovery
Root SuperSU 2.67.zip – Download
Drivers Samsung USB Drivers 1.5.51.0 – Download
ROM stock firmware Samsung Galaxy J1 Ace SM-J110H update
Samsung Galaxy J1 Ace SM-J110H
SM-J110H SLK J110HXXU0APB2 03.02.2016 Download
SM-J110H SEK J110HXXU0APB1 03.02.2016 Download
SM-J110H BNG J110HXXU0APB2 03.02.2016 Download
SM-J110H NPL J110HXXU0APB2 03.02.2016 Download
SM-J110H CAC J110HXXU0APB1 03.02.2016 Download
SM-J110H INS J110HXXU0APB2 03.02.2016 Download
SM-J110H KSA J110HXXU0APB2 03.02.2016 Download
SM-J110H CAU J110HXXU0APB1 03.02.2016 Download
SM-J110H SKZ J110HXXU0APB1 03.02.2016 Download
SM-J110H XSG J110HXXU0AOGA 25.07.2015 Download
Guide Odin Flash / Update firmware ODIN
- You do not need to root or unroot the device to update the firmware.
- Please ensure that KIES is closed and not running in the system tray!
0. Download and Install: Samsung USB Drivers 1.5.51.0 and ODIN
1. Just download the firmware version you want from this posts and extract the .tar or .tar.md5 file in the archive and save it somewhere.
2. Reboot your phone to download mode. To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin 3.**
- If your ROM is a single .tar.md5 package click on the AP/PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it.
- If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
BL = Bootloader
AP = PDA (CODE)
CP = PHONE (MODEM)
CSC = CSC
4. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
5. Connect the USB cable and wait for any required drivers to install and the ID:COM section to turn blue like below.
6. Click start to flash.
7. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.
*Note PDA/AP/CSC/CO/MODEM/etc
SM-J110H J110HXXU0AOGA, SM-J110H J110HXXU0APB1, SM-J110H J110HXXU0APB2