ODIN TWRP 3.0.0.0 and 3.0.0.1 : hero2qlte / hero2lte [info more]
Root SuperSU 2.68.zip – Download
Drivers Samsung USB Drivers 1.5.51.0 – Download
ROM stock firmware Samsung Galaxy S7 EDGE SM-G935F update
Samsung Galaxy S7 EDGE SM-G935F
SM-G935F PHN G935FXXU1APBF 6.0.1 25.02.2016 Download
SM-G935F XFU G935FXXU1APB6 6.0.1 06.02.2016 Download
SM-G935F ORO G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F AMO G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F DPL G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F TNL G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F PLS G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F DHR G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F VIR G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F CHO G935FXXU1APB4 6.0.1 04.02.2016 Download
SM-G935F XEF G935FXXU1APAW 6.0.1 29.01.2016 Download
SM-G935F BGL G935FXXU1APAW 6.0.1 29.01.2016 Download
SM-G935F XEO G935FXXU1APAW 6.0.1 29.01.2016 Download
Guide Odin Flash / Update firmware ODIN
- You do not need to root or unroot the device to update the firmware.
- Please ensure that KIES is closed and not running in the system tray!
0. Download and Install: Samsung USB Drivers 1.5.51.0 and ODIN
1. Just download the firmware version you want from this posts and extract the .tar or .tar.md5 file in the archive and save it somewhere.
2. Reboot your phone to download mode. To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin 3.**
- If your ROM is a single .tar.md5 package click on the AP/PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it.
- If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
BL = Bootloader
AP = PDA (CODE)
CP = PHONE (MODEM)
CSC = CSC
4. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
5. Connect the USB cable and wait for any required drivers to install and the ID:COM section to turn blue like below.
6. Click start to flash.
7. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.
*Note PDA/AP/CSC/CO/MODEM/etc
SM-G935F G935FXXU1APAW, SM-G935F G935FXXU1APB4, SM-G935F G935FXXU1APB6, SM-G935F G935FXXU1APBF