Is there any way to load TWRP on a non-rooted 6P, without a PC/cable? I left my only USB-C cable at work. Back in the day you used to be able to create a .zip that would automatically be picked up by fastboot/HBOOT, but not sure if that’s possible anymore. I tried searching for this answer for a while so I apologize if it’s already been posted.
↧
Install TWRP without a PC on non-rooted phone, possible?
↧
Akai N4 TWRP & Rom update
Looking for information on the Akai N4 phone Dec2014 model to update/install TWRP/Rom
↧
↧
[TF101] Unable to get into TWRP recovery after upgrading TWRP
Hi,
I rooted using:
OneclickrecoveryV0.4.2
Didn’t backup my original stock OS, and couldn’t book into an OS.
It was stuck in a loop, used OneclickrecoveryV0.4.2 to fix the loop.
Then it still did not boot into an OS. I put cm-10-20130929-NIGHTLY-tf101.
Worked fine. Wanted to try Katkiss 6.0. Did not seem to work with TWRP 2.5.
Download signed_twrp-2.8.1.1_tf101.zip. Installed it after booting into TWRP 2.5.
It looked successful and rebooted into OS fine. However, after I rebooted it, it is stuck now.
I can’t boot into TWRP. It gets stuck at "booting recovery kernel image".
Help…please! I am not tech savvy at all… it took me hours researching to even get to this point…
Did I brick it? :confused:
My girlfriend will be throwing pots and pans at me if I can’t fix this :rolleyes:
Thanks in advance…
↧
Stuck on TWRP, cannot boot into OS
When my phone was running, it turned to black screen somehow. I was like "hmm, what is going on?" So i thought its time to install new cm, new rom.
I installed new CM13 by using TWRPv2.8.6.0, and it said "Successful". But when I reboot, it automatically goes to TWRP screen and cannot boot OS.
I did try to install different cm, rom, but its not working at all. Still keep going to TWRP screen.
I installed new CM13 by using TWRPv2.8.6.0, and it said "Successful". But when I reboot, it automatically goes to TWRP screen and cannot boot OS.
I did try to install different cm, rom, but its not working at all. Still keep going to TWRP screen.
Please help me out!
↧
[TWRP & MORE] GanFan’s treasure box
GanFan’s Treasure Box
![]()
Introduction
Hey, guys, there is another topic based similar to this, but it’s not as resourceful as the works of GanFan. So that’s why I share it. Dunno why but I prefer the work of GanFan over cofface’s.
How to get the files?
It’s in his Baidu cloud, to download bigger files, you may need a Baidu account. Link: http://pan.baidu.com/s/1mhtwOyO
What’s in it?
I didn’t test it all, but there are some very promising files and also scripts that one-click sideload SuperSU for you.
Disclaimer
As always, think before you do! Before executing a script (shell or bash) be sure to read it and understand what the script does! As always, you are going to mess with your phone, so it’s certainly in your favor if you read up on what you are about to do before doing it!.
Link: http://www.miui.com/thread-3837936-1-1.html
Pictures say more:
↧
↧
How to flash stock ROM via TWRP
Dear All.
Sorry for my English.
Please help to fix the issue with my Nexus9.
Problem: when I Power On the device- it is show Fastboot screen. I can enter HBOOT->Recovery->device go to TWRP screen.
I don’t have any backups to restore.
Please advise:
-how can i flash device normally via TWRP (no sense stock ROM or rooted)? I just want my device normally work (with/without root no sense).
Thank you all in prompt
↧
Can’t Boot Into LP After Flashing Firmware With TWRP & Fastboot
Hi
I have a Moto G 4G (Peregrine, XT1039) and I’m trying to install some stripped down stock ROMS, which I will be then encrypting under Android. One ROM I particularary liked was lost101’s optimised version, but no matter what encrypting thr device just never worked. I have tried flashing unpackaged stock ROMS via mfastboot and have also tried flashing zips in TWRP. However, presently every time I reboot/boot the device it just goes straight into TWRP.
Will
↧
TWRP 3.0 now says “system software not authorized by ATT…”
My phone has the unlocked bootloader and I upgraded the phone to TWRP 3.0 today, but now is shows a samsung custom screen and won’t allow me to get into recovery after I flashed.
"Secure fail:kernal"
Any advice?
↧
Unable to create backup folder from TWRP, can’t take OTA, or anything
I’ve been struggling with my phone from day 1- hopefully someone here has experienced and solved some of what I’ve been facing.
First some info:
I have a non-rooted XPE 1575 with an unlocked bootloader. I have never been able to receive an OTA update and needed to install 6.0 using a clean install of a stock ROM. I now can not successfully install the security OTA update (i get a dead Andy ‘Error’). I have flashed stock recovery, boot image, and system chunks. No luck.
More alarming to me (and possibly a hint at what is going on) is that i can not even back up my phone using TWRP (v2.8.7.0). My internal memory is too small for this, so when i try backing up to my 128 GB sdcard (formatted to be adaptable), i get the following error E: Unable to create folder: /external_sd/TWRP/BACKUPS (errorno=5) E: Failed to make backup folder.
So, i can’t stay ‘stock-like’ and just use OTA updates, and i can’t backup my phone and then try to install a clean updated ROM.
Any ideas from anyone?
↧
↧
D950 g flex bricked only boots to twrp recovery can’t boot to download mode. Help
Hey guys as the title States I have my old d950 g flex that I ended up selling to a friend. The phone was rooted on the stock ROM, well all was good when I sold him the phone but being is a unlocked at&t phone when we got it did automatic ota updates which at that point bricked the phone. So now at this point the phone only boots to custom twrp recovery . shows the LG logo then goes straight to twrp every time. I’ve tried wiping the data, DAV cache, etc still to no avail to fix the boot. Now I’ve tried to get it into download mode so that I can flash it back to stock but the phone will not enter download mode. Every time it still goes to twrp. Is there a way to force it to Download mode so i can flash back to stock using rhe flash tool. And or even a way just to flash back to stock without the flash tool and download mode ? I’ve been searching and trying to get to work for days to no avail. So if you guys could help I’d greatly appreciate at the point were I’m about to just throw the phone in a fire and then have to give my friend his money so I’d really not want to do that lol so please help if you can. Thanks in advance
↧
Lenovo k3 note android 6- twrp custom recovery
hi ive just updated my lenovo k3 note to android 6 , now i wanna root it , but i dont have the suitable recovery fo that ive tried installing old recovery that was for the previous android i think and i bricked my phone but i recovered my phone and now its having new update android 6 please help me about the custom recovery fo that so i can root my phone
↧
how can i go back to twrp recovery
hi every one . i finally installed the cm13 on my lg g2 mini D618 .
i was have a twrp recovery v2710
and accidentally when i login to developer mode on my device i activate the choice of updating cyanogenmod recovery mode
and now instead the twrp recovery . i have a cyanogenmode recovery
so how can i go back to twrp recovery???
i was have a twrp recovery v2710
and accidentally when i login to developer mode on my device i activate the choice of updating cyanogenmod recovery mode
and now instead the twrp recovery . i have a cyanogenmode recovery
so how can i go back to twrp recovery???
↧
Root Redmi Note 3 (SD) with GLOBAL build ! Fully working on 7.1.8.0 with TWRP!
Hello Everyone,
I’ve shown the complete procedure in above video, you can follow that else guide is down below too!
Unlocked bootloader is must in order to do this! If you do not have unlocked bootlaoder then here is How to Unlock bootloader-
Here are the steps-
Download these files
ADB folder- https://goo.gl/BYCvea
TWRP recovery- https://goo.gl/XfrRUY
Modified boot image – https://goo.gl/E5pGDw
[The above boot image is only for 7.1.8.0]
Do not flash this if you are not on 7.1.8.0, it will result in loss of wifi or device not booting! {:4_98:}
Huge thanks to @TheStrix from XDA for making the modified boot image! {:4_106:}
1- Boot into Fastboot mode by switching off your device & then holding Power button & Voume – button simultaneously!
2- Flash the modified boot image by using this command- " fastboot flash boot boot.img "
3- Flash TWRP recovery by using this command – " fastboot flash recovery twrp.img "
4- Now boot into TWRp recovery by pressing volume + button & power button together until you see Mi Logo!
5- Now select Install > Select SuperSU zip file > Swipe to install
6- Now hit Reboot System!
You have successfully Rooted your Redmi Note 3 PRO! Enjoy ROOT access now {:m018:}
Your Feedback will be most appreciated
I’ll post the updates of boot image file in the description box so kindly keep checking that video if you do not see updates here!
↧
↧
How to Unlock Bootloader, Flash TWRP, and ROOT LG G4 H811 T-Mobile.
Now, I know this tutorial exists all over the place, like one-click and UnjustifiedDev tutorial but none seemed to work. I am sharing the steps and method I used IN-DEPTH command for command on how to unlock, flash, and root the LG G4 from Tmobile.
NOTE THIS WILL FACTORY RESET YOUR DEVICE SO BACKUP ALL YOUR DATA
1. Activate developer settings by entering the about section and tapping build number 7 times.
2. Enter your developer settings and MAKE sure you have ‘Allow OEM unlock’ and ‘USB Debugging’ enabled.
3. Download the latest SuperSU zip and move it onto your SD card.
4. Using the android issue SDK. Open a command window and link it to your SDK folder where ADB is located (typically Platform-Tools)
5. Once the Command window is linked to the folder, connect your device via USB and allow the connection.
6. On the command window type ‘adb reboot bootloader’ and the device should reboot with the fastboot options on the upper left of the phone screen
7. Once again on the command window type ‘fastboot oem unlock’ and the command window should say OKAY and complete the action.
8. To Confirm that the device is unlocked type ‘fastboot getvar unlock’ and the window should respond with ‘Unlock: YES’
9. Now download the latest available TWRP and drop it into the platform-tools folder where your ADB.exe is located.
10. On your Command Window type ‘fastboot flash recovery "NAME OF TWRP FILE" if you get the error ‘ cannot load ‘twrp-X.X.X.X-h811′ you need to add .img to the end of the filename
11. Once the process completes you will see ‘target reported max download size of 536870912 bytes
sending ‘recovery’ (32968 KB)…
OKAY [ 1.088s]
writing ‘recovery’…
FAILED (remote: unknown command)
finished. total time:’
THE FAILED UNKNOWN COMMAND NOTICE CAN BE IGNORED
12. Once the process completes the device may not let you enter recovery from the traditional method using the buttons on the back of the phone so the easiest method is to, on your command window, type
‘fastboot boot twrp-2.8.7.0-h811.img’ and the device should respond within just a few seconds and reboot into TWRP.
13. Once the device reboots, enter twrp and tap on install and locate the SuperSU.zip and allow it to install.
14. Once the process completes successfully, wipe cache to be safe and reboot your device.
15. Resetup your device and restore your data if necessary and install a root checker from Google Play to confirm root!
THATS IT GUYS! This took me a long time to figure this out and it’s a combination of different methods to get it to work!
All credit goes to the Devs of TWRP and SuperSU!
I posted in General because I’m a new user so please move to appropriate forums! thanks!
↧
[TWRP] [Recovery] [E6553] Xperia Z3+ Flashable recovery
Hello, guys.
Today I made a full working, flashable TWRP 3.0 recovery for our single SIM device. But do you still need it? Cause I made it for personal use, and if you do – I can post it here. Just need your answer. Thx!
Today I made a full working, flashable TWRP 3.0 recovery for our single SIM device. But do you still need it? Cause I made it for personal use, and if you do – I can post it here. Just need your answer. Thx!
MotexT
↧
[RECOVERY] [TWRP] [3.0.0] For Huawei G630
TWRP 3.0.0
for Huawei G630 Unofficial
Efran@Team- phoenix
Efrén Sáenz
Efrén Sáenz
Fanpage: like = future project
https://www.facebook.com/Phoenix-DEV-1719991991571980/
This Recovery TWRP supports All version of G630)
Requirements (English-Español)
* App Flashify:
https://play.google.com/store/apps/d…llner.flashify
* Root
* Recovery.img (Download)(Descargar)
http://www.mediafire.com/download/1e…2/recovery.img
https://play.google.com/store/apps/d…llner.flashify
* Root
* Recovery.img (Download)(Descargar)
http://www.mediafire.com/download/1e…2/recovery.img
Installation instructions (English-Español)
Download "Recovery.img. Next, Open Flashify and press "Recovery image"
then Choose a file and search the recovery.img downloaded.
wait and reboot. Enjoy
Descargar recovery.img luego, abrir Flashify y presionar "Recovery image". Luego buscar el archivo descargado.
esperar y reiniciar. Listo!
THANKS
-porcha18 (Efran)=Efrén Sáenz
Source Code: https://github.com/jarpii/android_device_g630-twrp
Version Information
Status: Stable
Stable Release Date: 2016-03-24
Current Stable Version: 02
Beta Release Date: 2016-03-24
Created 2016-03-24
Last Updated 2016-03-24
Screenshot
↧
Twrp recovery
I flashed the twrp recovery but every time a reboot or turn my phone off it goes to the recovery mode, how can I solve it without reflash my ROM? Please help, I’m using H530 xxu lollipop rooted with xposed, can I solve it by flashing the stock recovery? If someone has it I’ll be thankful
↧
↧
S4 I9505 – Ressurection Remix – Can’t Access TWRP 3.0.0
I’m running ResurrectionRemix-M-v5.6.5-20160316 with the latest TWRP recovery and Xposed.
The last time I used the recovery was on 22/03 to make a backup of my ROM (I’ve entered the recovery more than a dozen times before this backup with no issues).
Today I wanted to switch from Ressurrection Remix to crDroid (Ressurrection for some reason becomes laggy after use and only a reboot resolves this issue).
I downloaded all of the zips I required (ROM, GAPPS, SU etc.)
I selected to reboot to recovery using the advanced reboot option.
The phone rebooted and displayed recovery booting in blue as per the norm.
The TWRP splash screen showed for around 10 sec or so then the phone rebooted (this never happened before).
Thinking that this was a bug with the recovery, I tried turned off the phone via the power menu once my I got into MM and then removed the battery and used the power + up button combo to enter recovery however still no go.
Next I tried flashing the TWRP 3.0.0.tar file via odin, still no luck.
The question I have is how do I resolve the issue?
↧
Where to find TWRP 3.0.0-0 for i9000?
Hi guys, I have 2 Galaxy S’s. It was my first Android and I love it still – however..
One of them is on stock everything 2.3.6 and is lovely and shiny new looking.
The other has dead pixels, is tattered all to hell, but is running the latest A-Rom 6.0.1 build awesomely (I suggest you try it) and has TWRP 3.0.0-0 recovery. It was a recovery flash from a lacklustre 5.1 OMNI (I think) based rom, but no idea when!
I cannot for the life of me remember where I got that recovery file from.. I’ve googled the heck out of it and got nowhere! I’d really love to get the shiny one running Marshmallow, but it’s been years since I last poked around with all the files etc and frankly – i’m a bit lost.
a) Could anyone point me to that recovery file? I just can’t find it 
b) I’ve tried using adb to back it up but get permission denied and can’t find the option in superSU or the developers section to allow adb access. Where is it??
c) Is there an app I can install which will do it for me? which is supported by this phone?
Help! What’s the best thing to do at this point? I’d really like that OS and recovery on both.. though now I’m starting to contemplate taking them both to bits and swapping the internals around which I don’t really want to do..
↧
How to Install TWRP Recovery 3.0.0 Nokia X/XL
Veja "Como Instalar TWRP Recovery 3.0.0 No Nokia X!! [Usuário X]" no YouTube
https://youtu.be/tXaA-K9ZECQ
https://youtu.be/tXaA-K9ZECQ
↧