Stuck in recovery after failed update via TWRP

December 12, 2015, 6:29 am

≫ Next: Help: CM 12.1 Nexus 5 stuck in bootloop and freezes on TWRP load screen

≪ Previous: TWRP Experiments Thread

$

0

0

Hello,
yesterday I bought a used oneplus one.

It was showing me a notification that I can do the incremental update 12.1-yog4pas2ql. So I tried it. But after the restart it booted into TWRP (2.8.5.1) recovery.

Then I tried to flash the update (cm-bacon-7be76f9310-to-49d90510ef-signed.zip) with TWRP. But, as I now know, I haven’t set in developer options the option not to update the recovery.

The result is that at startup it now boots automatically into to stock cyanogen recovery. When I try to "apply update" I don’t see my cm-bacon-7be76f9310-to-49d90510ef-signed.zip in the folder. I only can find a cm-12.1.zip which seems to be from the previous owner.

When I select "Reboot to bootloader" it shows "fastboot mode" and is stuck in that screen. I can’t do anything but to turn it off.

I have rooted a Moto G before and I know I can do it when I know what to do. I’m completely unsure: should I select "factory reset" in the stock cyanogen recovery? I just need a starting point. I don’t need TWRP anyway, maybe it’s best to get rid of it?

---

Help: CM 12.1 Nexus 5 stuck in bootloop and freezes on TWRP load screen

December 12, 2015, 10:33 am

≫ Next: [TWRP] [BETA] [Unofficial] TWRP for BLU PURE XL & ALLVIEW X2 XTREME

≪ Previous: Stuck in recovery after failed update via TWRP

$

0

0

I’ve got quite a peculiar problem with my Nexus 5.

Last night, I left my phone on charge. It was working normally and the software was functional etc. However, once I woke up, the phone was constantly restarting itself, and wouldn’t load past the boot animation. I tried to load up fastboot to enter the TWRP recovery, however, the phone froze on the load screen. I should also add that my custom boot animation was replaced by the CyanogenMod mascot.

This problem has never occurred before, and I really haven’t got a clue how to fix it. I tried to use WugFresh’s NRT to flash a factory image of Android 6, however, the command terminal indicated that each process had failed. This did not restore the phone to its original condition.

I should also point out that I have been running a CM 12.1 nightly, which has been very stable and I have been using this nightly, without major problems (bar the infrequent system UI crashes) for a couple of months. It is obviously rooted and I have a Nandroid backup, which I can’t access for aforementioned reasons.

Please could you help me with resurrecting my phone? I would be happy to clarify and elaborate upon any point of information.

Kind regards,

Sami

[TWRP] [BETA] [Unofficial] TWRP for BLU PURE XL & ALLVIEW X2 XTREME

December 12, 2015, 11:41 am

≫ Next: Cannot mount any patitions in TWRP

≪ Previous: Help: CM 12.1 Nexus 5 stuck in bootloop and freezes on TWRP load screen

$

0

0

Credits:

Dees_Troy and whole TeamWin Dev team.

@xathras – finding TWRP image for Redmi Note 2

carliv – Carliv Image Kitchen

No Thanks to BLU/GIONEE/MEDIATEK for withholding Source Code … Please Follow GPL …

This image has been tested to work with both BLU PURE XL & ALLVIEW X2 xtreme, but standard warning applies…

**FLASH AT YOUR OWN RISK**

BLU_PURE_XL_TWRP.img

Not Working:
– adb commands from recovery (sideload, push/pull, etc)
– mount storage to Computer

Cannot mount any patitions in TWRP

December 12, 2015, 12:29 pm

≫ Next: [RECOVERY][Nokia X/XL] TWRP Recovery 2.8.7.0 Materialised

≪ Previous: [TWRP] [BETA] [Unofficial] TWRP for BLU PURE XL & ALLVIEW X2 XTREME

$

0

0

Hi guys

Currently trying to flash Cynagenmod onto my nexus 7.

Ive unlocked the bootloader and installed multiple version of TWRP via adb

When I boot into recovery I cant mount any of the partions to wipe/flash but I can still push CM rom onto the SD card

Ive also tried flashing ClockWordMod but it doesnt but into Recovery.

Any ideas?

Thanks

Sent from my C6903 using XDA Free mobile app

[RECOVERY][Nokia X/XL] TWRP Recovery 2.8.7.0 Materialised

December 12, 2015, 1:28 pm

≫ Next: Need help! No os on a9, have twrp, can’t do ruu

≪ Previous: Cannot mount any patitions in TWRP

$

0

0

TWRP Recovery 2.8.7.0 Materialised For Nokia X/XL

Code:

---

#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

---

Hi Guys, This is New Recovery For Our normandy devices By me and @Ahmed Hady

it has new look, simple as an app, with a lot of new features like backup recovery, flash .img files and MTP connection.
Screenshots Here or below
Download: http://www.mediafire.com/download/9x…terialised.img

How to install:
Flash "recovery" partition using my tool Universal Toolkit For Nokia X/XL
Or: Nokia X Flasher
Or: you must have fastboot set up on your pc and then:

Code:

---

adb reboot bootloader
fastboot -i 0x0421 flash recovery TWRP-2.8.7.0-normandy-Materialised

---

Don’t Forget to Hit Thanks :good:

Attached Thumbnails

 

 

 

 

 

 

 

 

Need help! No os on a9, have twrp, can’t do ruu

December 12, 2015, 8:21 pm

≫ Next: Can’t find backup in TWRP

≪ Previous: [RECOVERY][Nokia X/XL] TWRP Recovery 2.8.7.0 Materialised

$

0

0

need a rom that works for t-mobile version or stock a9 rom (i can’t use ruu, need img only):crying:

Can’t find backup in TWRP

December 12, 2015, 10:27 pm

≫ Next: ( URGENT ) STUCK JUST IN TWRP recovery only!!!

≪ Previous: Need help! No os on a9, have twrp, can’t do ruu

$

0

0

So, in an earlier post, i mentioned the problems caused by converting my SD card to internal storage. In trying to fix that, i ended up not being able to boot my device, so i went to restore a backup and realized that since TWRP doesn’t see the sdcard, i’m in some trouble. I have a stock image that i’m trying to restore to, but no matter where i put it on my phone, TWRP is not seeing it when i try to ‘restore’. I’ve put it in /TWRP/BACKUP and in /sdcard/TWRP/BACKUP (which isn’t really my actual SD card). neither shows in the selection list while in TWRP.

Where do i need to move this so i can restore the file? Again, i can’t select ‘MicroSDcard’ from TWRP. If there is a way to convert the card back to portable storage from recovery, i’m fine formatting it and doing that.

( URGENT ) STUCK JUST IN TWRP recovery only!!!

December 13, 2015, 8:42 am

≫ Next: [Recovery][kccat] TWRP 2.8.7.0 Touch Recovery [13-12-2015]

≪ Previous: Can’t find backup in TWRP

$

0

0

Hey,
Guys looks like i made a big mesh ..

My phone was running lollipop 5.0.2 .

I was having TWRP and was rooted Mistakenly i check for updates from Phone and download it & pressed install . This was my big mistake :confused::confused::confused:

I was rebooted to TWRP recovery and as we all know system updates cant be installed from TWRP . after that i press reboot system but again i was returned to TWRP . i wiped all System,cache,data and factory reset it but still with no OS i am going back to TWRP recovery .

I tried to restore my previous TWRP backup but again after successful restore too after i click system reboot i will be back to TWRP recovery .

In TWrp recovery fastboot command is also not working <<< waiting for device>>> & i am not being able to go to Bootlodder too for Fastboot command support.

What’s the solution please reply me .

---

[Recovery][kccat] TWRP 2.8.7.0 Touch Recovery [13-12-2015]

December 13, 2015, 9:42 am

≫ Next: prime bricked!!! I think… can’t accept bootloader. stuck at twrp screen but can’t

≪ Previous: ( URGENT ) STUCK JUST IN TWRP recovery only!!!

$

0

0

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

Phone look:

Tablet look:

CHANGELOG for 2.8.7.0:
– Initial release with f2fs support!

DOWNLOAD:
For our kccat6 (Galaxy S5 Plus) we don’t have any official support, so I have my own mirrors, you can download the recovery from here:
Android Filehost Link. There are two version, one for flashing with your current recovery (the zip file) and one for flashing with odin. For odin select AP tab and add the twrp file, flash it on your phone using download mode.

If we ever get official support:

Most devices can be updated quickly and easily with the TWRP Manager app, but the S5 plus does not have official support! Here would be the app:
Play Store Link
1) Install TWRP Manager from the Play Store
2) Open TWRP Manager and provide root permissions
3) Hit Advanced->Install Recovery
4) Verify the correct device name on your screen then press Install Recovery if the correct device is showing
5) You can find more information and download links on our NEW website!

BUGS:
– Aroma installer is untested, please check if it is working or not!
– If you have found another bug, please consider posting it to our github issues log. It’s pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that’s struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!

SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link

XDA:DevDB Information
TWRP for kccat6, Tool/Utility for the Samsung Galaxy S 5

Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/device_samsung_kccat6_twrp

Version Information
Status: Nightly
Current Stable Version: 2.8.7.0
Stable Release Date: 2015-12-13

Created 2015-12-13
Last Updated 2015-12-13

prime bricked!!! I think… can’t accept bootloader. stuck at twrp screen but can’t

December 13, 2015, 12:47 pm

≫ Next: TWRP Error flashing Zip on Android 6.0

≪ Previous: [Recovery][kccat] TWRP 2.8.7.0 Touch Recovery [13-12-2015]

$

0

0

hi. I have prime and it is stuck into twrp screen with just teamwin screen keep on flashing. nothing happens and it doesn’t boot into recovery(twrp) also. tried to boot into bootloader by holding power button and volume down but nothing happens. then tried adb. used abd reboot bootloader and also adb fastboot recovery. but nothing happens, only shown "waiting for any device". thought adb not working but when I type adb devices…..it shows device serial number and recovery written next to it. I think adb works but I am not able to boot into recovery or bootloader….
earlier I was using cayanogen rom and twrp as recovery… tried to falsh another rom and from that day had this problem. if anyone knows what should do or what’s the problem.. I be very thankful… please if you have any idea tell me what to do😢😢

TWRP Error flashing Zip on Android 6.0

December 13, 2015, 4:33 pm

≫ Next: Back to the TWRP 2.8.4 bootloop problem..

≪ Previous: prime bricked!!! I think… can’t accept bootloader. stuck at twrp screen but can’t

$

0

0

So I’ve been trying to install V4A and xPosed on my rooted Nexus 6 but everytime I flash anything in TWRP, I get the "Error flashing zip" message. It’s really pissing me off, especially V4A because it seems as if everytime there’s a new Android version, Viper gets more and more complicated to install and the various methods are all guess work as to which one will actually work. Now, I can’t even get Twrp to install anything. I installed TWRP through the app after I tried doing it through adb. Does anyone know wtf is going on with my recovery? Here’s an image of what I’m talking about.

Attached Thumbnails

 

Back to the TWRP 2.8.4 bootloop problem..

December 13, 2015, 6:39 pm

≫ Next: TWRP Error Executing Updater Binary

≪ Previous: TWRP Error flashing Zip on Android 6.0

$

0

0

Ouch… went to install new 12/13 via TWRP and here is the new problem. I copied over the twrp image from this thread posted as 2.8.3-12-23-14.zip. When I have this TWRP image in the /boot partition I can boot into TWRP but if I try to install the 12/13 build it can not load the data and cache partitions and errors out. Is this supporting F2FS? Anyway, I rebooted the 12/09 build and extracted the previous TWRP image I had been using, the 2.8.4.0 with F2FS support and copied it to the /boot partition. Now I am back to the original problem of TWRP being in a boot loop and stuck at the Teamwin screen. If I go back to the 2.8.3, it works, only I can not install the 12/13 zip as I get the errors on the /data and /cache partitions. Back to the 2.8.4… and boot loop… Any ideas on how to fix this… Thanks, Rick

TWRP Error Executing Updater Binary

December 13, 2015, 7:33 pm

≫ Next: Require TWRP Recovery for HTCD820U

≪ Previous: Back to the TWRP 2.8.4 bootloop problem..

$

0

0

I am trying to flash ressurrection remix 6.0 on my oneplus and I keep getting the error: Error Executing Updater Binary in TWRP! I unrooted then rooted again and now I am on stock 5.1.1 firmware fresh with twrp installed. Someone please help me!

Require TWRP Recovery for HTCD820U

December 13, 2015, 9:45 pm

≫ Next: phone stuck on warning bootloader screen and cwm or twrp recovery unable to install

≪ Previous: TWRP Error Executing Updater Binary

$

0

0

Hello, anybody have twrp recovery for latest lollipop os (untouched and unrooted)
HTC Desire 820U (Indian Version)
Android version- 5.0.2
Software no. 2.10.720.4

Please give me a link if you have it. Thanks in advance!

phone stuck on warning bootloader screen and cwm or twrp recovery unable to install

December 13, 2015, 10:35 pm

≫ Next: Twrp backups

≪ Previous: Require TWRP Recovery for HTCD820U

$

0

0

i had cm 12 installed on my phone and when i updated it to cm 13 via ota.. after update it showed google play services error. i then tried to wipe data factory reset through mobile settings but itswitched off the phone and on rebooting data was not wiped.
then i wipe data through fastboot it wiped my phone but in cmd it showed erase succesfull but not automatically formatting..
after that on rebooting it stuck in warning bootloader page.
i can access fastboot and cyanogen recovery but unable to installl cwm or twrp via fastboot..
shows partition error…
plz help…….

---

Twrp backups

December 14, 2015, 2:45 am

≫ Next: [UNOFFICIAL][RECOVERY][coriplus] TWRP 2.8.6.0 [2015-12-14]

≪ Previous: phone stuck on warning bootloader screen and cwm or twrp recovery unable to install

$

0

0

Can I make a twrp back up of my apps and app data on say for example cm 12.1 and restore that apps and app data backup to for example cm 13?

[UNOFFICIAL][RECOVERY][coriplus] TWRP 2.8.6.0 [2015-12-14]

December 14, 2015, 3:39 am

≫ Next: Screenshot in TWRP

≪ Previous: Twrp backups

$

0

0

Quote:

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

This is an unofficial port of TWRP for Samsung Galaxy Pocket Plus. The original work code is done by @Alonso1398 but since he abandoned his updates for our device I’m carrying this project from now on

About
TWRP is an open source, community project that was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After their work on the EVO 4G they wanted to work on a project that would work on more devices than just the EVO 4G and they settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.

A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM

Disclaimer

Quote:

I am not responsible for bricked devices or dead SD cards, your are the one who decided to flash this recovery

Bugs/What’s not working?
-Fully working, you tell me

Changelog
Visit the official TWRP changelog

Download links
– MEGA

FAQ
Visit the official TWRP FAQ

Support
If you have found a bug, please consider posting it in this thread, also grab recovery.log in /tmp or I can’t help you.

You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/

Screenshot in TWRP

December 14, 2015, 1:28 pm

≫ Next: Need a tester to test my build of TWRP for the a32eul

≪ Previous: [UNOFFICIAL][RECOVERY][coriplus] TWRP 2.8.6.0 [2015-12-14]

$

0

0

Didn’t see this posted anywhere so I thought I’d share. It is possible to take screenshots in TWRP by using the button combo (hold power + vol down). I don’t know if it’s a recovery or OS thing but I noticed this on both lollipop and marshmallow. I’m using TWRP 2.8.7.1

Attached Thumbnails

 

 

 

Need a tester to test my build of TWRP for the a32eul

December 14, 2015, 3:42 pm

≫ Next: Touchscreen problem after upgrading to latest TWRP 2870

≪ Previous: Screenshot in TWRP

$

0

0

Hello. I have what is a result of me trying to compile a build of TWRP for the HTC Desire 626s TMOBILE VARIANT!! the device model is a32eul. I cannot test this because i lent my phone to a friend who just trashed his phone. Anyone who is willing to test build i would really appreciate it. This build is from captain_throwback’s source for the a32e.
If you ave a SPRINT! HTC Desire 626s then just use this twrp its fully working.

XDA:DevDB Information
HTC Desire 626s Tmobile RECOVERY?, Tool/Utility for the HTC Desire 626

Contributors
Jmingels
Source Code: https://github.com/CaptainThrowback/…evice_htc_a32e

Version Information
Status: Testing
Current Beta Version: 1.0

Created 2015-12-14
Last Updated 2015-12-14

Touchscreen problem after upgrading to latest TWRP 2870

December 14, 2015, 6:28 pm

≫ Next: TWRP issues

≪ Previous: Need a tester to test my build of TWRP for the a32eul

$

0

0

I had been running rooted rom (Darth Stalked) 5.0.1, COD6… for months, no problems. I had TWRP 2.8.4.0 installed… So today I downloaded TWRP 2870 from the official web site, and ACCIDENTALLY installed the one for NOTE 4 EDGE (and I have a regular NOTE 4 SM-910T)

So afterwards I realized all the margins for the touchscreen were off, I would have to touch a little HIGHER UP on the screen to hit the button

1 2 3
4 5 6
7 8 9

as an example, think of having to press between the 3 and 6 to actually press 9.

Well, the stylus (s-pen) still seemed to work, so I was able to correctly navigate back to twrp site, download 2870 for note 4 t-mobile (the one I needed). but the touchscreen is still messed up (still not touching where I touch with my finger, but the s-pen works and does hit where it touhces)

I restored a nandroid backup, no change
I factory reset, no change
I reflashed twrp 2840, no change
I reflashed twrp 2870, no change
I wiped cache and dalvik, no change

So, trying to press my finger on the touchscreen registers too high or innaccurate, but the s-pen seems to work. THIS ALL STARTED AFTER I MISTAKENLY INSTALLED THE NOTE 4 EDGE TWRP 2870 and I can’t figure out how to UNDO whatever it did.

I am still on COD6, have TWRP 2870 installed, I reverted back to an older nandroid I made with TWRP from about 4-5 months ago, but the touchscreen is still not accurately activating where I press with my finger… PLEASE HELP ME.