Hello everyone here I have an error has 7 install any custom rom and I’m stuck on the logo 1+ it does not restart even with backup thank you for your help ![😉]()
↧
Twrp problem
↧
Need help with TWRP installation
Hello All,
Need help with TWRP installation, I have tried everything to install TWRP on my one plus x but with no luck 
The problem is to unlock OEM, when I am trying to do it it hungs up.
I followed the installation given –> http://forum.xda-developers.com/show….php?t=2588979
Upon updating Driver via Device Manager, I don’t get the ADB interface but get ONE Plus Interface and it installs MTP drivers and not the "Android ADB Interface", please help!!!:crying: I tried all possible ways but with no luck, any help will be highly appreciated!
Regards,
Vineeth
↧
↧
Install OTA with TWRP recovery for XT1572 24.211.58.clark_reteu.reteu.en.EU reteu
Hey,
I’m getting an OTA Update for my XT1572 with 6.0.1 and 24.211.58.clark_reteu.reteu.en.EU reteu.
Trying to install the OTA my phone boots into TWRP and won’t install the OTA. I can boot into Android after trying to install the OTA but i get stuck in kind of a bootloop as my phone trys booting into recovery for some time.
Is this because I have TWRP instead of stock recovery?
I installed 6.0.1 using the ressources in this thread: http://forum.xda-developers.com/moto…posed-t3276792
But the zip does not contain the stock recovery.
What do I have to do to install OTAs properly?
Thanks!
↧
Galxy J700 Marsmallow TWRP FLASH, Rooting Guide and Xposed Module Flash Ststem
Flash Twrp File Via Ordin
Download TWRP Latest File from here..
See This Video Tutorial How To flash It Tech Portal Video Tutorial
Than Go To recovery Mode and InstallSUPER SU from Here
Than again Back and Install Xposed Module Flashable Zip
Than reboot your Device [its Take 10/12 minite]
Than Install This apps Xposed Module.apk
And Enjoy
↧
Galxy J700 Marsmallow TWRP FLASH, Rooting Guide and Xposed Module Flash Ststem
Flash Twrp File Via Ordin
Download TWRP Latest File from here..
See This Video Tutorial How To flash It Tech Portal Video Tutorial
Than Go To recovery Mode and InstallSUPER SU from Here
Than again Back and Install Xposed Module Flashable Zip
Than reboot your Device [its Take 10/12 minite]
Than Install This apps Xposed Module.apk
And Enjoy
↧
↧
Le1 Pro US – Keeps booting into TWRP
Hi,
I have the US version of the Le 1 Pro and managed to install TWRP with the method in the twrp/rootguide but after I’ve installed supersu and gapps in TWRP then rebooting it keeps going back into TWRP? I do I boot up the ROM? Thanks.
I have the US version of the Le 1 Pro and managed to install TWRP with the method in the twrp/rootguide but after I’ve installed supersu and gapps in TWRP then rebooting it keeps going back into TWRP? I do I boot up the ROM? Thanks.
↧
about twrp app
does it need to have twrp already installed? https://twrp.me/devices/samsunggalaxyj1ace.html can i flash stock recovery to twrp using this app if i have root access?
Sent from my MITO A310 using xda app-developers app
↧
The pain in the butt, or: How to deal with problems persisting through TWRP wipe?
What would really help me is a list of actions I can take to wipe "more than TWRP allows".
Take my device closer to the state it left the factory in.
Format everything I can and start anew.
Get in there deep.
It doesn’t have to be a step-by-step guide (not saying I wouldn’t appreciate it), but I would like a general idea of my options (and bricking risks).
Take my device closer to the state it left the factory in.
Format everything I can and start anew.
Get in there deep.
It doesn’t have to be a step-by-step guide (not saying I wouldn’t appreciate it), but I would like a general idea of my options (and bricking risks).
After switching from android 5 ROMs to Marshmallow ROMs on my Lenovo K3 Note everything was fine. Until one day, suddenly, a weird problem appeared. You really don’t need to read this, but here it is if you’re bored http://forum.xda-developers.com/k3-n…quick-t3399845 . TL;DR: quick setting/notification pull down menu stopped working on home screen on ANY 6.0 ROM
Posted this problem on several forums and got no useful feedback. So it’s time for a nuclear option.
My reasoning is:
- 6.0 ROMS used to work perfect
- 6.0 ROMS get problems
- After formatting data problem still exists with other 6.0 ROMS
- Therefore the problem must lie in data not formatted under TWRP.
Any other explanation?
↧
HELP : Error executing updater binary in zip : TWRP (SM-A500G)
Well, let me tell you, I DID see the other threads before posting this one about the topic, but believe me, none of the topics met my condition, and none solved my problem. :crying:
I have a Galaxy A5 (SM-A500G), and tried to flash CM12.1 unofficial TEMASEK version by @mygalaxya . I followed EVERY single step correctly, but when I tried to flash the ROM using TWRP, it said "Error executing updater binary in script."
I tried to rename ‘a5lte’ to ‘a5ltedd’ in updater-script in zip/META-INF/com/google/android
But, it didn’t work.
Also, my stock firmware had stopped working a few days ago. The phone automatically switched off after running out of charge although I kept the charger connected throughout the night (if you understand what I’m saying :p ) And then, when I switched on the phone, it booted into TWRP. I chose Reboot and then System, but it just won’t boot normally… It kept on rebooting into recovery mode..!! So, I finally gave up, and tried to flash CM12.1 into the phone. And, the above error came up.
What do I do? HELP…
Here’s the link to the post by @mygalaxya ..
http://forum.xda-developers.com/sams…xy-a5-t3153129
↧
↧
[RECOVERY][LETTUCE][UNOFFICIAL] TWRP 3.0.2-0 For Yuphoria
Here I Am Back With Any TWRP Update 3.0.2-0 For Lettuce aka Yuphoria
Introduction
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Introduction
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom ROM like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Source : TWRP.me
What’s New In Update :confused:
Quote:
|
|
Downloads : TWRP 3.0.2-0
Flashing Method :
If you are already on existing TWRP just choose Install image -> navigate to downloaded recovery and choose it and install
Via fastboot mode :
fastboot -i 0x2A96 flash recovery twrp_3.0.2-0_lettuce.img
Note : Make sure you are on unlocked bootloader if you are flashing custom recovery for first time
Kernel Source : Github
Device Tree : Uploading
Hit Thanks If U Like My Work
↧
Twrp [recovery]
Hi guys i was trying to find twrp for my old Galaxy s i9000 to flash 6.01 rom.
But i can’t seem to find twrp! Can someone link it with a guide? Thanks in advance!
But i can’t seem to find twrp! Can someone link it with a guide? Thanks in advance!
PS REPOST (posted at wring section)
↧
Twrp [recovery]
Hi guys i was trying to find twrp for my old Galaxy s i9000 to flash 6.01 rom.
But i can’t seem to find twrp! Can someone link it with a guide? Thanks in advance!
But i can’t seem to find twrp! Can someone link it with a guide? Thanks in advance!
↧
just found this looking for twrp for MM
I was doing a search across the web for dnx blah n blahs and stumbled upon this — i have no idea if the twrp for 6 works as i just downgraded to five for official 6 ota when it comes — so watch what thy be doing ![😮]()
mega:///#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw!FsU1jKzJ
↧
↧
TWRP – Materialized (Play Theme)
Hello! ![:)]()
The following provides info, instructions, download links, and credits
Note: Because I am not yet able to post in the development section; this post will stay here temporarily
INFO
Why This Version?
This TWRP theme will stay even after a wipe or reset, and is more stable to use.
Me – I am a totally new guy to xda ,developing, and stuff, so please keep the questions to somewhat of an understandable scale :p.
TWRP – Team Win Recovery Project, is an open source, community project. It is a custom recovery used for installing custom software on your device.
Instructions
First of all, please note that you can brick and totally destroy your device, if you do not follow these instructions correctly. And you will be solely responsible for the damage.
Option 1 – If you already have TWRP installed
Option 2 – If you don’t already have TWRP
Download Link
Material TWRP 1.1 – HERE
Material TWRP 1.0 – HERE
Changelog
1.1 – Removed Change Splash and Change Theme from theme settings
1.0 – Initial Release
Credits
TeamWin – For the TWRP
z31s1g – For the beautiful theme
osm0sis – For Android Image Kitchen
if I forgot you please forgive me and PM me
↧
TWRP Recovery for MT6580 (MT8752)
Hello
i tried many times Easy Magic TWRP installer/Easy Magic PhilZ Touch installer both, auto & manual both not working, on auto when it near to finish my tablet auto disconnected from pc & Easy Magic PhilZ Touch installer says port successfully but on recovery mood same old stock recovery, when i try to do manual it gave error in the last, Aborting, Ported recovery.img is too large & causes region overlap! i tried to use 7mb partition way to fix it but no success.
my tablet is some chinese unknown company tablet with mt6580 (MT8752) chipset & running android lollipop 5.1, i already rooted just want to install custom recovery, any help will be highly appreciated. following is phone detail screen images.
i tried many times Easy Magic TWRP installer/Easy Magic PhilZ Touch installer both, auto & manual both not working, on auto when it near to finish my tablet auto disconnected from pc & Easy Magic PhilZ Touch installer says port successfully but on recovery mood same old stock recovery, when i try to do manual it gave error in the last, Aborting, Ported recovery.img is too large & causes region overlap! i tried to use 7mb partition way to fix it but no success.
my tablet is some chinese unknown company tablet with mt6580 (MT8752) chipset & running android lollipop 5.1, i already rooted just want to install custom recovery, any help will be highly appreciated. following is phone detail screen images.
with CPU X
& with AIDA64
PS. if you need any file from my stock rom i can provide coz i have all backup of stock rom with scatter file.
Regards
↧
quick ? on TWRP 3.0.0.2 for OPT
when one does a backup there are the normal options (system, data, EFS, firmware etc.) but I see System image option, what is this and how does it differ to the other options, and which options should one choose? thanks
↧
[D855 – 32GB] TWRP Recovery won’t boot
Good morning.
I installed the latest TWRP and then the Fulmics MM rom. Sadly, I now can’t update, because TWRP won’t boot, it gets stuck on that logo. I need to update this rom, a few apps are excruciatingly laggy ( eg Waze and Shazam )
What can I do to fix this? Thanks for any help
↧
↧
How do I build CWM or TWRP?
I have a custom android ROM which I have built from source. I now want to build either CWM or TWRP. However, I am having a few problems:
1.) Where do I find the TWRP and CWM source? All I could find is CyanogenMod/android_bootable_recovery on Github for CWM and omnirom/android_bootable_recovery on Github for TWRP, but these do not look like the official repositories.
2.) From what I can make out, the recovery partition must be built along with the custom ROM, rather than as a standalone thing. How do I set up the android source to build a different recovery source when "make recoveryimage" is run?
↧
[RECOVERY][JALEBI][UNOFFICIAL] TWRP Recovery 3.0.2-0 For Yunique
Team Win Recovery Project 3.x, or Twrp for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Introduction :
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom ROM like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Source : TWRP.me
Flashing Method :
If you are already on existing TWRP just choose Install image -> navigate to downloaded recovery and choose it and install
Via Fastboot Mode :
fastboot flash recovery TWRP_3.0.2-0_Jalebi.img
Note : Make sure you are on unlocked bootloader if you are flashing custom recovery for first time
Source : Github
Credits :
@charansai (Me) For Building
@dees Troy For TWRP
@amalappunni For Testing
@you For Using
↧
Question twrp recovery keeps changing to stock recovery
Hello guys,
I’m a bit new to posting things to this forum. My english isn’t very good either :fingers-crossed:
My problem is:
i’m trying to install TWRP recovery to my s7. Everytime i install it with Odin everything works and when i reboot into recovery it goes automatically to my stock recovery.
LOG odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port …. 0
<OSM> All threads completed. (succeed 1 / failed 0)
Could somebody please help me with my problem
I’m sorry if this has been asked before but i just can’t find the awnser
i’ve used this tutorial: http://www.droidviews.com/install-tw…s-g930ffdxsw8/
↧